mini hybrid win!

[POLAND_SPUD]

uhmm.... 0.75" cal ? lol wtf?!
Finally something with a bit MOAR umph!

which already exceeds tolerable noise levels for an urban environment

You can use this as a refference site
http://world.guns.ru/ammunition/russian ... ges-e.html


check SP-3 and PZAM silenced pistol ammunition

ohh well I know you've already been considering this

[Fnord]

[fiberglass] ...as a wrap, but not as a filler, right?

As a filler it works fine. You usually can't cast it like normal epoxy unless you chop up the fibers a bit and agitate it, but in a case like this it doesn't need to flow very much.
A 50/50 weight ratio is probably fine for high-strength applications.

...
I imagine that 800psi prototype of yours that blew up and hid chunks of epoxy everywhere would not have failed with a mix of 'glass in it.
Honestly I've only worked with the stuff enough to become proficient but I still have nothing negative to say.

[jackssmirkingrevenge]

uhmm.... 0.75" cal ? lol wtf?!
Finally something with a bit MOAR umph!

Er... what did you think I was firing the CO₂ capsules out of?

ohh well I know you've already been considering this

To be completely honest, this is what it started out as... but a shot at 6x shattered the barrel ( ) so I decided to give a conventional suppressor a go

I imagine that 800psi prototype of yours that blew up and hid chunks of epoxy everywhere would not have failed with a mix of 'glass in it.

I doubt it, the design was really bad...

[jackssmirkingrevenge]

double post

[POLAND_SPUD]

To be completely honest, this is what it started out as

Now you're probably wondering 'Where the f... did he I hide the camera?!'
Don't bother... it's a ceiling cat

Er... what did you think I was firing the CO2 capsules out of?

ohh yeah I forgot. But IIRC the MV wasn't very high
Sure co2 capsules are relatively heavy, but there is always some room for improvement

[jackssmirkingrevenge]

I need to seriously rethink shock absorption, but more importantly the challenge is to find a sabot that is strong enough to resist the firing forces but light enough to be easily caught, no mean feat.

But IIRC the MV wasn't very high
Sure co2 capsules are relatively heavy, but there is always some room for improvement

Highest recorded for a 30 gram capsule was 308 feet per second at 12x. With the bigger chamber and slightly longer barrel I'm sure I can better that significantly, the issue is noise so it depends on how the suppressor performs.

[Selador]

er... fiberglass?

...as a wrap, but not as a filler, right?

Fiberglass is fine as a filler for epoxy.

You have to mix the epoxy in the first place, right ? Just cut up some fiberglass and mix it in at the same time.

Carbon fiber might be better.

And to add radial strength to an epoxy casting, wrap the fiber around it several times, layering epoxy along with it.

Bronze wool might be a good additive to epoxy, for added strength. (Fine steel wool wouldn't be worth much as a filler.)

Of course, with ANY filler, you start to get into whether the filler itself make a weak point. Kind of like stress fractures...

[jackssmirkingrevenge]

Of course, with ANY filler, you start to get into whether the filler itself make a weak point. Kind of like stress fractures...

I've even used airsoft BBs, for large areas where strength is less important I detest mixing too much epoxy so whatever is to hand to fill in goes

[JDP12]

I was thinking of using steel BB's..

[jackssmirkingrevenge]

I was thinking of using steel BB's..

Word of caution, there is something out there with steel BBs encased in resin, and it's not built for strength

[JDP12]

ahahaah excellent point. Maybe I'll just stick with airsoft bb's

[jackssmirkingrevenge]

Back on topic, just to give an idea of scale, here's the latest compared to the rest of my hybrid family

[JDP12]

wow..... that thing should yield some impressive power results!!

Can't wait to see, how long til its ready to fire?

[jackssmirkingrevenge]

Technically it's cured, but it's early morning, not the best time to find out if the suppressor is effective or not hopefully I'll try it out after work

[Lockednloaded]

Holy sh*t, there's no way that suppressor couldn't work, that thing is overwhelming!