Does Anyone know how to make Camera flash sparkers

[Shandora]

im trying to find out how to make a camera flash spakers for my guns but i never can get it right anyone got any suggestions?

[Ballad_Black]

Goto getoffmynuts.com. It's an actual site with stupid videos, but one shows you how to make it, a full length video, about 5 mins on how to do it. Its under "Our Videos". Just keep hoveing over pictures of the videos to see what they're about and finally you'll see taser.

[Shandora]

yes i have seen that be fore but i havent found a way to ignight it in the cannon

[TalonXxX]

its around... just search for it. trust me, google goes a long way. do a little research first before just asking for the answer to be handed to you.

[Shandora]

listen i have searched for 3 month on the internet. theres a part that im looking for here to do it the camera taser thing is all ican find but i need a way to trigger it inside of my cannon.

[TalonXxX]

well i figured out how to do it on the net, so you just weren't looking hard enough. if i come across is again... i will post the link

[TalonXxX]

it doesnt really get much more complicated than this.... http://www.angelfire.com/80s/sixmhz/camera.html

[Ballad_Black]

What do you mean, you dont know how to ignite it in the cannon? No matter what you find, thats how to make the stun gun from a camera. You run the wires to screws in the chamber, Its not a difficult process, I promise.
If you cant figure it out you dont need it. Remember that.

[boilingleadbath]

<a href ="http://www.spudfiles.com/spud_wiki/inde ... cusion></a>

[Timekiller]

The only way to fire it in the comb. chamber is mechanicly strike the two contacts with a piece of metal.

BTW... What Shandora is talking about is there is not enough amperage in a camera cap to jump a gap. A taser is built a little diff.

[boilingleadbath]

"...mechanicly strike the 2 contacts with a piece of metal."
Not true, at least Galfrisk doesn't think so.

"amperage"
That'd be voltage... which is not entirly true; it just has to be a small gap.

[Timekiller]

Yes voltage sorry... but the gap would be very small, almost impossible to create without touching.

And you could rig something to strike the contacts, like get an old R/C car remote and servo. Put a piece of metal on it, and when you move the servo, bam! remote firing!

[Shandora]

he is right my point was that i need it to jump

[beebs111]

guys look at the hvc 1
topic under official combustion