Airsoft Shotgun

[CannonCreator]

I was wondering if anyone has made a succesful airsoft shotgun, that can go through a can at least. Cuase I want to make one to go airsofting with cuase my sniper ain't cutting it. I plan on making it full metal, for high pressure. I would use a 3000psi 68ci Nitrogen tank for the air source, so it is portable when using in a game. I also plan on using a 3/4 barrel. Does anyone think I can get them to go through a can at 15-20 feet somehow?

Should I use a smaller barrel?

[jon_89]

on my pnuematic i can put about two dozen bb's through a thick box and some go all the way through and that is about ten feet away at 100 psi.

[thespeedycicada]

possibly with multiple barrels (for the bbs) inside a larger barrel like this.http://www.spudfiles.com/forums/pb-shotgun-t6977.html

[CannonCreator]

possibly with multiple barrels (for the bbs) inside a larger barrel like this.http://www.spudfiles.com/forums/pb-shotgun-t6977.html

Ya lol thanks, I was just going to edit my post and ask that.

[Marco321]

I had an idea like this in the shower..... So here it is
The part that you pump is where the stuff happens, and it is really easy to make (should be). What if, as you pulled the pump back, it opened a ball valve between the air source and the chamber, filling to the desired pressure, then when you push it back to its normal position, the ball valve closes. Then connect a simple sliding magazine and breach mechanism to the pump.
The entire action is:
1.Pull the pump back, this opens a ball valve, filling the chamber. This also opens the breach, allowing a bb or something to fall into place in the barrel.
2.The pump is pushed forward, this closes the ball valve, stopping the flow to the filled chamber and closing the breech preventing any more ammo from going into the chamber.
3. Fire then go back to step 1.

The only problems i can see is having the ball valve open enough to fill the chamber properly and allowing only a certain amount of bbs into the barrel

[CannonCreator]

Or you can also have some of Piston mechanisum for the pump back, instead of a ball valve.

I like your idea a lot, but should I use Nitro/Co2 or make the shotgun a combustion that runs off of propane?

[Marco321]

Or you can also have some of Piston mechanisum for the pump back, instead of a ball valve.

I like your idea a lot, but should I use Nitro/Co2 or make the shotgun a combustion that runs off of propane?

You could have the pump actuate a sprinkler instead of a ball valve. This will allow the sprinkler to stay open until the desired pressure is obtained, without having to leave the pump half cocked for a while. This should work, because the sprinkler will reset when equal pressure is obtained on both sides, unless i am mistaken.

It depends. Nitrogen will give slightly more power because it is lighter than co2, but only by a small amount, but the nitrogen will give the same power as normal air on the surface of the earth because it is like 70%-80% nitrogen i think. I would go with what is cheapest though lol.

[turbohacker]

I was wondering if anyone has made a succesful airsoft shotgun, that can go through a can at least.

Why would you want a gun that powerful to use in an airsoft game?

Maybe you should try a vortex, Im not really sure about your playing style, however if you play in the NPPL than you are probobly the type of person that trys to empty your hopper as quickly as possible, Theirfore I think a vortex would be right up your ally.

Something to consider.

[Marco321]

I heard its not a good idea to use cloud/vortex in airsoft games due to the high rate of fire.

[Redcoat]

Yes like hell i have made an airsoft shotgun.

I just got my sprinkler valve pneumatic, got some cotton wool rammed it down then loaded in about 25 bb's and then rammed down another piece of cotton wool and then fired it at a coke can. Went through both sides. .

I'll get a vid up soon. (oh speak of the devil.)


Happy SPuddin'


Here.
[youtube][/youtube]

I also made a shorter changeable barrel and a cartridge for the bb's for room takedowns etc. Not much use though when you have to pump though.

[CannonCreator]

I am on of those kids who try to empty there hoppers as fast as they can but, I don't know if a vortex has a high enough FPS for someone to feel it that much. Cuase when I airsoft I go with these guys that work at this airsoft shop and they use like those huge vulcan cannons, and when you get hit by them you bleed bad, they even all have first aid, and they treat you after you get hit. It hurts so much more then being in the NPPL

But what kind of FPS ortex recieve of a 3000psi nitro tank, or a Co2 tank?

Cuase I need a high speed and high fps. Or High FPS and a shotgun load

[SpudBlaster15]

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Cras nec placerat erat. Vivamus dapibus egestas nunc, at eleifend neque. Suspendisse potenti. Sed dictum lacus eu nisl pretium vehicula. Ut faucibus hendrerit nisi. Integer ultricies orci eu ultrices malesuada. Fusce id mauris risus. Suspendisse finibus ligula et nisl rutrum efficitur. Vestibulum posuere erat pellentesque ornare venenatis. Integer commodo fermentum tortor in pharetra. Proin scelerisque consectetur posuere. Vestibulum molestie augue ac nibh feugiat scelerisque. Sed aliquet a nunc in mattis.

[noname]

Using a vortex strafer, upping the pressure increases ROF and FPS. Regulating it to 200 or 250 psi will probably give you at least 450 fps.
Of course, it also depends on the vortex block, the barrel length, the air input, adn valve, etc.

[frankrede]

I am on of those kids who try to empty there hoppers as fast as they can but, I don't know if a vortex has a high enough FPS for someone to feel it that much. Cuase when I airsoft I go with these guys that work at this airsoft shop and they use like those huge vulcan cannons, and when you get hit by them you bleed bad, they even all have first aid, and they treat you after you get hit. It hurts so much more then being in the NPPL

But what kind of FPS ortex recieve of a 3000psi nitro tank, or a Co2 tank?

Cuase I need a high speed and high fps. Or High FPS and a shotgun load

Those cannons must be shooting way past the limit then.
Airsoft shouldn't hurt more than a paintball.

[CannonCreator]

I am on of those kids who try to empty there hoppers as fast as they can but, I don't know if a vortex has a high enough FPS for someone to feel it that much. Cuase when I airsoft I go with these guys that work at this airsoft shop and they use like those huge vulcan cannons, and when you get hit by them you bleed bad, they even all have first aid, and they treat you after you get hit. It hurts so much more then being in the NPPL

But what kind of FPS ortex recieve of a 3000psi nitro tank, or a Co2 tank?

Cuase I need a high speed and high fps. Or High FPS and a shotgun load

Those cannons must be shooting way past the limit then.
Airsoft shouldn't hurt more than a paintball.

well there hardcore airsofters, and the get everything cheap cuase most of them work at airsoft shops, the cannons are going around 460- 480 fps. There classic Army M16's are going around the same.