Micro Combustion - pics and vid.

[inonickname]

This is my micro spud gun. It's also my first (working) spudgun.

Pictures:









Instructable on building:

http://www.instructables.com/id/Micro_Spud_Gun/

Video:



The vid was taken when the chamber was leaky(and with paper). It breaks cd's with bbs now.

[starman]

Not half bad actually...one of the best conceived micros I've seen around here.

However, fueling is and always will be your biggest challenge with these things.

[inonickname]

Not half bad actually...one of the best conceived micros I've seen around here.

However, fueling is and always will be your biggest challenge with these things.

Thanks,

One tiny squirt of a can of Lynx deoderant I have works just fine, but it's easy to put too much in. I've also built a breech loader and a silencer for it, but they're mainly novelties. If anyone is interested I could get some pictures.

[starman]

If anyone is interested I could get some pictures.

Sure, throw them online. You never know when it might inspire higher thinking!!

[inonickname]

The collar slides to reveal a breech to load ammo into. Is airtight and hasn't leaked yet. Silencer has holes drilled in inner and outer barrel, with cotton wool inbetween them. Depending on what ammo you use it is nearly silent.

[theBOOM]

hm is that tape... and then a flexi things that you put on pencils?

[MountainousDew]

Boom,
The last time someone posted here was a year ago... Look at the dates before typing a message.

[theBOOM]

Im sorry... but I really wanted to know what it is... plus inonickname is still active.. so I see no reason why not to post.....

I know that you should´nt bring up old threads but if you have a reason ..?

[inonickname]

If you have a question 'bout a gun then the creator will never mind replying to pm's.

I think you're talking about the silencer, it's part of a blue marker super glued and tape onto the barrel.

I'll give you a quick bit of advice if you try to make a silencer, maker sure you make the holes flush with the barrel! In small bores like this you will lose near all performance if there's anything sticking out.