My mini mod gun...

[jeepkahn]

It's basically a parts gun, and YES the blowgun adapter is ghetto, but with a chamber this small, it's not a big issue...

It's a 1.5"x10" chamber attached to a 3/4" qev, piloted by your good old fashioned blowgun, with a 3/4" camlock for barrel swaps...

from 100 ft, it will put the blowdarts through oak 2x12 with 1 inch sticking out on the exit side, the 3/4" barrel will shoot nail type blowdarts through the same.

I've only got 2 barrels for this one, a blowdart barrel attached via garden hose to a npt to mht adapter and a 3/4" camlock. and a 3/4" barrel about 20" long to a camlock...

Can you tell I'm addicted to cam locks... there are some things they aren't suited for, but for this they work real well...

[Mitchza89]

Very nice mate. Spare part guns are always the best What pressure are you running through this little beauty?

[SpudsMcGee]

Very nice for a spare parts gun (not that theres anything wrong with them).

[jeepkahn]

I've run this up to 180psi... Sound's like a .22 firing the darts, and a 9mm when firing masrbles/bearings from the 3/4" barrel...