what size vortex block hole supplies the fastest rof?

[adem70]

hey guys I'm back, the school recently got a cnc so I'm in business to make my parts, I was just wondering what i should make the vortex blocks hole size be for the fastest rof possible, ive seen videos with 1.75 inch ones giving very good results.

[deathbyDWV]

1.75 seems really big... *twss* Most people use around a 3/4 inch hole...

[clemsonguy1125]

Id use a half hole vortex with a .75 inch, anything under an 1 inch should be fine, are you planning on using aisoft or metal bbs,

[adem70]

airsoft bbs, and whats a half hole? i havnt seen that on here or youtube

[Marffy]

Its a vortex cut in half basically. i've got a piece of 1" pipe as my vortex and it has a very high rate of fire.

[adem70]

do you have a link to an example of it?

[irisher]

This one shoots insanely fast with a full hole 3/4"(However that is with HPA)

[adem70]

what exactly do you mean by an hpa tank? compressed air instead of co2?

[irisher]

what exactly do you mean by an hpa tank?

They are tanks similiar to Co2 tanks but filled with 3000-4500 PSI of compressed air. They are available in paintball stores and online.

[clemsonguy1125]

Here's a how to on half hole vortex blocks
http://www.spudfiles.com/forums/inline- ... t5259.html

[adem70]

the half block doesnt look like it would fit with the rest of my design, I think I'm going to stick with a 1" full inline. already have it all drawn up in cad an everything.

[DR]

You may wanna check out some of these:


<a href="http://www.neospud.com/mark2/mark2.html" target="_blank"><img src="http://www.neospud.com/mark2logo.PNG"></a>

<a href="http://www.neospud.com/mark3/mark3.html" target="_blank"><img src="http://www.neospud.com/mark3logo.PNG"></a>

<a href="http://www.neospud.com/mark3i/mark3i.html" target="_blank"><img src="http://www.neospud.com/mark3ilogo.PNG"></a>

<a href="http://www.neospud.com/cannonpages/clearbbmg.html" target="_blank"><img src="http://www.neospud.com/clearlogo.PNG"></a>

<a href="http://www.neospud.com/cannonpages/inlinevortex.html" target="_blank"><img src="http://www.neospud.com/vortexlogo.PNG"></a>


Main Page: Neospud - Innovative Creations:
<a href="http://www.neospud.com/airsoftworks.html" target="_blank">Neospud Creations: Airsoft Works</a>

[clemsonguy1125]

Yep neospuds guns would be the perfects example of bbmgs but also to improve your rof you will want to shorten the barrel

[adem70]

I've seen those already, actually have them bookmarked, the mk 3 is exactly what im trying to create, but he doesnt list vortex block specs.

[clemsonguy1125]

So your planning on making your vortex out of sheet PVC, not sure but I think the vortex is under1.75, you could always make several and just test them