Inline BBMG

[clemsonguy1125]

Heres a basic inline, I designed it to use with a compressor but mines not set up yet so I run it off a air tank I had leftover from a old project. Yeah I use a DWV clean out cap but the inside pressure is only 20 PSI. Im working on the body of the gun and I may give it a stock, this is just a preview of what Ive got so far, Ill update it as I finish it.

Block-Wood, 3/4 hole
Pressure-60 PSI
Barrel-5/16 Brake line in half inch PVC
Capacity-1000 rounds, maybe
Power-Decent
Chamber-1.5 inches
[youtube][/youtube]
[youtube][/youtube]






Result of a 2 second burst

[Gun Freak]

Nice bro, can't wait to see it on a compressor, it'll be so awsome.

[irisher]

You could probably make it bullpup and cut off some barrel for more compact design.

[clemsonguy1125]

Thanks, I thought about that but I don't want a compact gun, I'm making it inta an assult rifle type design so the size is ok, also I just painted it so I'll get some pics up asap

[irisher]

I guess with your setup it is probably easier to load.

[clemsonguy1125]

Yeah, I just unscrew the cap and dump the bbs in, for som reason when ever I add the spring it jams up the gun, I'll upload the pics of it paint Jo. Later

[irisher]

when ever I add the spring it jams up the gun,

Do have shims on the block? If not then it will most likely jam. You might also try a weaker spring.

[clemsonguy1125]

No shims the blockes glued in so I may get this working then salvage most of it, the barrel, blow gun, and stock for v2

[irisher]

You might try to get a two shims put a bit of epoxy on each edge and put them on with the block still in. (It's kinda hard to explain)

[clemsonguy1125]

I get it, I can pull the back of the bb chamber out by undoing the screws so I may try after I get my compressor working, heres the paint job pics

[Gun Freak]

Paint looks cool, better if you covered up the white spots...
Why bother rebuilding it, jsut try to fix it as is.

[clemsonguy1125]

I may try if i get i working decently and want more power i really dont want to bother with a spring if I can help it, As for the white spots, i spary a thin layer of black over it to fix that

[Gun Freak]

Alright, is your air input just a 1/4 nipple?

[clemsonguy1125]

1/8 and im gonna get another to screw in the blowgun, Ill slide a piece of tubing over them so i can but the blowgun on the side of the gun, its not going to fire realisticly

[clemsonguy1125]

BUMP-I added a new video of the painted gun shooting off a compressor and made a few other changes