Would this work?

[Goats spudz]

Will this work for semi auto?

[Alster370]

What is the thing with the knob and gauges?

[Goats spudz]

What is the thing with the knob and gauges?

a regulator, why haven't you seen one before?

[jor2daje]

it might, but two issues I see are you dont block of air from the pilot so when you pulll the blowgun you let air out of your main chamber as well as the pilot, a three way valve would be much better suited. Also on some of the regulators I have seen the bottom port is on the low side so you wouldnt be able to fill the large tank, you would need a T fitting before the regulator.

[MrCrowley]

It wont work as semi-auto if you leave the regulator open the entire time. Put a three way valve between the regulator and QEV, remove the blowgun. You'll have semi-auto then.

[Goats spudz]

it might, but two issues I see are you dont block of air from the pilot so when you pulll the blowgun you let air out of your main chamber as well as the pilot, a three way valve would be much better suited. Also on some of the regulators I have seen the bottom port is on the low side so you wouldnt be able to fill the large tank, you would need a T fitting before the regulator.

im going to hook up a fridge compressor to it and the tank is small, and mr. crowley how will i trigger it if there isnt a trigger?

[MrCrowley]

mr. crowley how will i trigger it if there isnt a trigger?

Google search

This topic is a STICKY in this section

[Goats spudz]

Ok thanks! i wasn't quite sure! lol