M1A1 Bazooka

Cannons powered by pneumatic pressure (compressed gas) using a valve or other release.
biged
Private 4
Private 4
Posts: 99
Joined: Sat Jun 09, 2007 8:06 am
Been thanked: 1 time

A replica of the WW2 M1A1 "Bazooka".

Image

Valve: 2 inch serviceable piston
Porting: 1.5
Barrel: 2.625
Construction: Steel
Piloting: .25 QEV
Trigger: Blowgun
Action: Breech loading
HopUp: Yes
Pressure range: 290 psi (burst pressure of hose, Chamber pressure tested up to 400 psi.)
Range: 175 @ 110psi - 250 @ 150psi (Direct shot - flat trajectory)
Ammo: Tennis balls

I have been told by a WW2 veteran that this fires at roughly the same distance and speed as a real bazooka.

The hopup educes a backspin on the tennis ball also known as the Magnus effect. The ball leaves the barrel at somewhere between 220 fps and 310 fps, depending on pressure. The backspin keeps the ball on a flat level trajectory until it "drops" and comes to almost a complete stop. It is really wild to watch the shot from the side. The ball leaves the barrel, then slows down, and falls. It almost looks like it is in slow motion. You can easily catch the tennis ball with your hands beyond at 75-100 feet.

Image

World's largest hopup. (That I know of.)
Image

Image

A cut-down, drilled & tapped blowgun with oak grips.
Image

Rear shroud that covers the QEV.
Image

Rear site.
Image

Front site.
Image

Open the mini ball valve until desired pressure. Close. Pull trigger to fire.
Image

Image

///ed///
User avatar
Stifler69
Private 3
Private 3
Posts: 56
Joined: Fri May 30, 2008 11:46 pm
Location: Melbourne. Victoria
Contact:

Wow man thats looks awesome !
Major Pain
User avatar
littlebro05
Specialist 4
Specialist 4
Posts: 418
Joined: Wed Oct 17, 2007 5:04 am
Been thanked: 1 time

Dude that gun looks sexy man!...

It reminds me of Saving Private Ryan, If only I had the brains for such great guns... well I'm in training at the moment getting there...

I love that hop up too haha! Does it do much?

You reckon you could pop a video up soon?
It's Nerf or Nothing.

Don't start crying when I play this as my hobby, Paintball, Airsoft and Nerf are equally good hobbies, except you can play Nerf in public. Good day! Hmph!
User avatar
frankrede
Sergeant Major 2
Sergeant Major 2
Posts: 3220
Joined: Thu Jul 20, 2006 9:47 pm
Has thanked: 1 time
Been thanked: 1 time

Wowza! That looks great!
Looks like it weighs a good 20 pounds or so!
Current project: Afghanistan deployment
User avatar
SpudFarm
First Sergeant 3
First Sergeant 3
Posts: 2571
Joined: Sat Nov 04, 2006 9:39 am
Location: Norway Trondheim area

best best! great work!

how did you manage to get all those ideas ?
"Made in France"
- A spud gun insurance.
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26219
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 581 times
Been thanked: 347 times

Again, great work. Is this and the mortar intended for mil-sim wargaming? Given the substantial construction and clear potential for performance, it would be a shame to see it downtuned to "safe" levels...
hectmarr wrote:You have to make many weapons, because this field is long and short life
nivekatoz
Specialist 2
Specialist 2
Posts: 237
Joined: Sat Nov 25, 2006 7:05 pm

Thats really nice..I like the whole stock and pistol grip wood thing..COOL!!! :thumbright:
Something that just came to mind. You could make a storage box for it like the army has for wepons..Just a wood box that stores the gun nice and neat..Maybe you can find a storage wood crate made already just mod it to fit your gun..You could stamp or stencel model #numbers and U.S or what ever just to make it look like a real militery storage wooden crate.
User avatar
starman
Sergeant Major
Sergeant Major
United States of America
Posts: 3027
Joined: Wed Dec 12, 2007 12:45 am
Location: Simpsonville, SC

Pretty decent workmanship here...a lot of custom crafting and detailing effort was obviously put into it. Great job!!

Are you pressurizing with an air compressor? Do you expect to take pressures higher than 150 psi?
biged
Private 4
Private 4
Posts: 99
Joined: Sat Jun 09, 2007 8:06 am
Been thanked: 1 time

I have shot it at 260 psi, and the hopup will "over hop" but it will sail the ball out to the 300 foot marker. 3 out of 4 shots will head straight for the target, then sail over it and land behind it.

The danger zone is under 75 feet, it will kill you under 25 feet if you are hit in the head. A 56 gram tennis ball traveling at 220 fps is 125.96 joules. It will also crack a car windshield under 25 feet.

///ed///
User avatar
ALIHISGREAT
Staff Sergeant 3
Staff Sergeant 3
Posts: 1778
Joined: Sat Aug 25, 2007 6:47 pm
Location: UK

its... beautiful *tear*

:D fantastic looking piece of cannon you have there, the green goes reall well with the wood on the grip and stock :wink:

and is the sight actually useful, or is it just for show, because with a bit of effort you could have calibrated it before welding it on.
User avatar
marpat
Private 4
Private 4
Posts: 75
Joined: Thu Jun 05, 2008 9:31 pm

WOW
i love it
it is positively amazing

possibly an m1 garand from you next?
User avatar
mark.f
Sergeant Major 4
Sergeant Major 4
Eritrea
Posts: 3643
Joined: Sat May 06, 2006 11:18 am
Location: The Big Steezy
Has thanked: 58 times
Been thanked: 62 times
Contact:

Looks great! It always feels great to heft a cannon you can use as a club as well.
User avatar
blind909
Corporal 4
Corporal 4
Posts: 828
Joined: Thu Aug 02, 2007 6:06 pm
Location: Las Vegas, NV
Contact:

Really nice, but do you realize that the M1A1 is the Thompson Sub Machine gun? Not a bazooka

Sorry, I just looked it up, and you are right. :oops:
<a href="http://www.danasoft.com"><img src="http://www.danasoft.com/citysign.jpg" border="0"></a><div>
THIS STATES WHERE YOU LIVE, NOT ME, IT SAYS WHERE YOU LIVE BASED ON YOUR IP ADRESS.
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26219
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 581 times
Been thanked: 347 times

blind909 wrote:Really nice, but do you realize that the M1A1 is the Thompson Sub Machine gun? Not a bazooka
SMG, Bazooka, and plenty of other US weapons ;)
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
Eddbot
Specialist 4
Specialist 4
Posts: 434
Joined: Tue Oct 09, 2007 6:08 pm

nice!! looks great!!
i always like em' when they look real :)
jackssmirkingrevenge wrote:
blind909 wrote:Really nice, but do you realize that the M1A1 is the Thompson Sub Machine gun? Not a bazooka
SMG, Bazooka, and plenty of other US weapons ;)
kinda sad that there's no originality in the naming process...

btw, anyone know what mark's sig means?
:edfirst:
Post Reply

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

  • Similar Topics
    Replies
    Views
    Last post