Advanced combustion cannon

[niglch]

I made this under-over advanced combustion cannon with a friend last summer. It performs very well with an HGDT estimated muzzle velocity of over 500 ft/s with a 70g projectile. It's got quite a kick. The only drawback to the gun is its heaviness. The fuel and metering system strapped on board adds a considerable amount of weight. The gun is triggered by an electric grill igniter housed in the back handle. Sorry I don't have any pictures of the interior of the chamber. I'll upload them as soon as I get a chance.

Stats

• *Barrel length: 72 in
  *Barrel diameter: 1.5 in
  *Chamber volume: 180 in³
  *C:B Ratio: 1.5
  *Fuel: Propane

Features

• *4-gap spark strip
  *Breach loading barrel
  *On-board fuel meter
  *Push button trigger
  *12v chamber fan controlled by toggle switch
  *Toggle switch safety mechanism

[youtube][/youtube]

[McCoytheGreater]

Niiiice. I'm a fan of combustion guns, not that I have a problem with pneumatic's though. You have a good looking gun, and I like the chamber vent through the front grip. As far as the heaviness goes, have you thought about using pvc for the meter pipe? That would lighten things up considerably. Or maybe use a cartridge type propane injection like Starman uses on Triple Thunder.

[Moonbogg]

Nice! Damn good aim as well.

[SpudBlaster15]

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Cras nec placerat erat. Vivamus dapibus egestas nunc, at eleifend neque. Suspendisse potenti. Sed dictum lacus eu nisl pretium vehicula. Ut faucibus hendrerit nisi. Integer ultricies orci eu ultrices malesuada. Fusce id mauris risus. Suspendisse finibus ligula et nisl rutrum efficitur. Vestibulum posuere erat pellentesque ornare venenatis. Integer commodo fermentum tortor in pharetra. Proin scelerisque consectetur posuere. Vestibulum molestie augue ac nibh feugiat scelerisque. Sed aliquet a nunc in mattis.

[deathbyDWV]

Look good. It does remind me of one of sb15's launchers. Like he said, I think the front handle is a little awkward... Nice damage though...

[bighead33]

where did you get you parts from?

[vblock]

looks pree siick dude 8) check out mine . it the one that says my huge potato gun not so getto i think i forget haha pce

[VirusX]

Hey,

Your combustion cannon looks pretty cool and you all aim well! 8)

But I've got a qestion:

Is the inner diameter of the barrel really just 1.5 inch (3,8cm)!? Or did you mean the radius? When I look up 1.5inch on the folding rule, I can't image that any potato or apple or whatever would fit anywhere near. And your barrel looks much bigger than 1.5inch in your video.

Or do I just get something wrong?

(Sorry for my bad english!)

[MikeNice]

Love the gun dude. Looks like good power, good aim, good damage! Needs some paint though! I am always amazed at the amount of destructio a potato cannon can lay out. I am currently in the planning stages of my (which means I want to build but don't have the $$ to build) new advanced combustion. All my cannons have been PVC so they're all kinda heavy; I've learned front handle placement is key. Have you thought about a shoulder strap? Again, awesome effort dude.

[mark.f]

Can't believe I didn't reply to this. Very nice cannon.

The only suggestion I have (which is moot, now) would be to drill your electrodes under the saddle tees to hide the wiring.

[Gaderelguitarist]

I'm going to have to now do some damage tests with my old faithful.

I like the expression on the guys face after he shoots it. Kind of a 8) "I'm the Sh*t!"

With a 6' barrel, I would have just made this thing a shoulder fire cannon. I have one with a 5' barrel and it just looks silly when I fire it like a rifle.

[VirusX]

Hey,

Your combustion cannon looks pretty cool and you all aim well! 8)

But I've got a qestion:

Is the inner diameter of the barrel really just 1.5 inch (3,8cm)!? Or did you mean the radius? When I look up 1.5inch on the folding rule, I can't image that any potato or apple or whatever would fit anywhere near. And your barrel looks much bigger than 1.5inch in your video.

Or do I just get something wrong?

(Sorry for my bad english!)

*push*

Does anyone know the anwser?

[Gaderelguitarist]

It's diameter. You can expect thgat it'll be slightly larger as PVC pipes have the "pipe size" and then the "average size".

The average ID of 1.5" PVC pipe is 1.592"