adapting propane injection meter

[bennettjackson]

please help, i have everything done for a propane injection system im just a little confused on how to adapt the torch head to the pressure regulator, thank you

[jimmy101]

Short length of pressure hose and a couple hose clamps.

[metalmeltr]

Remove the torch tube-unscrew it- use a 1/4" compresion to 1/4" NPT adapter
http://www.spudfiles.com/forums/say-hel ... 21926.html
there is a picture here of how mine is set up

[bennettjackson]

thanks can i find one of those at a lowes or home depot?

[metalmeltr]

yes they should be in stock at either HD or Lowes. Mine came from HD

[bennettjackson]

ok thank you, last question, my mixing fan is about 6 inches from the back end of my chamber, would the propane still function if i threaded my fittings into the back coupling behind the fan?

[metalmeltr]

It won't make any differance what so ever.

[bennettjackson]

thank you, also what type of hose are you using if any?

[metalmeltr]

I used to use a short peice of air hose. i heve replace it with the swivel fitting in the post about my gun.