modding a de-solder pump

[chinnerz]

some of you make have readthis, i discovered that there was a product which could be modded to make a powerful hammer.

also in that topic i said i would never make it.... that was before i lost the oring and shattered the piston in 5 places...

i also had a busted bike pump sitting around, and since i had nothing better to do, i started making a nurf pistol. i will probably disassemble this later in order to use the hammer for something a little more 'my style'

modding:








i dont own a nurf gun or any darts so i dont know what barrel to put on it/if i already have one.... so stay tuned for more updates

essentially what i did was solder a bolt to the end of the rod which the piston was attached to, and cut a hole out of the side to allow the bolt to pass though, and i took off the black grip at the top, if you wanted a hammer, its already finished, just make a trigger to push the black button.

to make the nurf gun, i cut a section out of the bike pump i had, and cut off the little piston. the section was to make the chamber and the piston was attached to the end of the metal rod for the de-solder pump.

[psycix]

How creative!
So you are using it to create a springer?

[iknowmy3tables]

cool, but the link you gave in the beginning doesn't work
also nurf is supposed to be spelled N-e-r-f
and you can make a nerf dart barrel from certain markers or some 1/2" cpvc pipes have the right bore diameter see this link
or alternatively you could make an airsoft gun the most crude airsoft barrels can be made from the plastic shaft of a bic pen

[chinnerz]

haha sry about that miss spelling nerf, as you can tell, i have never had any experience with it.

How creative! Very Happy
So you are using it to create a springer?

ahh well im trying

[iknowmy3tables]

and I'm sorry if something I said killed this thread, I'm surprised that there arn't more replies

anyways I understand, in fact my dad actually spelled it as knerf

also could you fix the link

some of you make have readthis,

actually now that I see the code, the problem is that the address is: url=http://www.spudfiles.com/forums/hammers-t20248.htmlurl
instead of
url=http://www.spudfiles.com/forums/hammers-t20248.html

[chinnerz]

fixed the link

[Gun Freak]

Can somebody please explain to me how a hammer valve can be made semi auto or give me a link to an example? Thanks lol